Product Catalog

Power: 2.2 kW / 3 HP Input Voltage: 3~380V/50Hz Speed: 1050 rpm Air flow: 250 L/min (9.0 cfm) Tank capacity: 150L Maximum pressure: 12 bar Weight: 110 kg Packing Dimensions (L × W × H): 72 × 57 × 139 cm Packing: Wooden case

AIR LUBRICATOR FOR GREASE (POMPA GEMUK TENAGA ANGIN) -TIPE : AIR LUBRICATOR FOR GREASE - capacity: 20 L -QUANTITY DUS KECIL/ BESAR : 1 Set

External clamping: 10~21” Internal clamping: 12~24” Max. wheel diameter: 39” Max. wheel width: 14” Air supply pressure: 8–10 bar (116–145 psi) Optional power supply: 220V/50Hz Motor power: 1.1 kW Noise level: ≤75 dB Net weight / Gross weight: 166 / 190 kg Package dimensions: 960 × 760 × 800 mm

ARBOR PRESS 1 TON

17 pcs clucth aligning tool set

petrol compression tester kit

diesel compresiion tester kit

ENGINE STAND 2000 LBS

Capacity 50 ton Working Range 650–900 mm Stroke 190 mm Net Weight / Gross Weight 220 kg / 245 kg Package Size 34 × 93 × 190 mm Package Material Wooden case

Position 1 (fully retracted boom): 2000 kg (2 tons) Position 2: 1500 kg (1.5 tons) Position 3: 1000 kg (1 ton) Position 4 (fully extended boom): 500 kg (0.5 tons) Boom Adjustment: 4-position adjustable boom (4-hole precision boom) Maximum Lifting Height: Approx. 2250-2335 mm (88.6-91.9 inches) Boom Working Range: 1050-1590 mm (41.3-62.6 inches) Hydraulic Cylinder Stroke: Approx. 236 mm (9.3 inches) Hydraulic Ram Capacity: 6 ton heavy-duty hydraulic cylinder Operation: Manual hydraulic pump operation 70kg Package 1: 144*30*16cm Package 2: 64*57*8cm

FUEL INJECTOR CLEANER & TESTER Product Name: AUTOOL CT200 Fuel Injector Cleaner & Tester Brand: AUTOOL Model: CT200 Type: Ultrasonic Fuel Injector Cleaning and Testing Machine Cylinder Capacity: 6 cylinders (can test/clean up to 6 injectors simultaneously) POWER SUPPLY Voltage: 110V / 220V (dual voltage support) Frequency: 50/60Hz Power Consumption: Approx. 200-300W ULTRASONIC CLEANING SPECIFICATIONS Ultrasonic Cleaning Power: 70W Ultrasonic Frequency: 28 kHz / 40 kHz Cleaning Tank Capacity: 2000 ml (2 liters) Cleaning Fluid Heating: Yes (heating function available) Cleaning Time Setting: 0-20 minutes (adjustable) TESTING SPECIFICATIONS System Pressure: 0 - 0.6 MPa (adjustable) Pressure Gauge: Yes (analog pressure gauge on top) Pulse Width (PWM): 0 - 20 ms (step 0.1 ms) Speed Range: 0 - 7500 RPM Injection Times: 0 - 9900 times (adjustable) Test Time Setting: 0 - 10 minutes (adjustable) Cylinder Volume (Graduated Cylinder): 100 ml / 150 ml (per cylinder) Number of Test Cylinders: 6 cylinders TEST MODES Test Functions: Uniformity test Sprayability test Sealing/leak test Injector flow test Atomization observation Idle speed test Medium speed test High speed test Acceleration test Variable speed test DISPLAY & CONTROL Display Type: Digital LED / LCD display Control Panel: Button control with digital display Display Language: English Pressure Regulation: Manual pressure regulating knob COMPATIBILITY Supported Injector Types: Gasoline fuel injectors (EFI) Most automotive and motorcycle injectors Compatible with 12V injectors Supports most European, American, and Asian vehicle brands Applicable Vehicles: Cars Motorcycles Light trucks SUVs PHYSICAL SPECIFICATIONS Main Unit Dimensions: Approx. 405 × 300 × 380 mm (L × W × H) Net Weight: Approx. 10-12 kg Color: Yellow + Black Housing Material: Metal + ABS plastic Construction: Heavy duty metal frame FEATURES 6-in-1 design: cleans and tests up to 6 injectors simultaneously Ultrasonic cleaning technology for deep cleaning Simulates various engine operating conditions Tests injector uniformity, spray pattern, sealing, and flow rate Adjustable pressure and pulse width Transparent graduated cylinders for visual inspection Built-in pressure gauge for real-time monitoring Test fluid can be recycled Suitable for professional workshops and garages Easy to operate with clear display PACKAGE INFORMATION Package Type: Wooden case / Carton box with foam protection Package Dimensions: Approx. 450 × 350 × 420 mm (17.7 × 13.8 × 16.5 inches) Net Weight: Approx. 11 kg Gross Weight: Approx. 13 kg Quantity per Carton: 1 set Packing Method: Standard export packing PACKAGE CONTENTS 1 × Main unit (Fuel Injector Cleaner & Tester) 1 × Set of injector adapters/connectors 1 × Power cord 1 × Funnel (for filling cleaning fluid) 1 × Set of sealing rings / gaskets 1 × Drain valve assembly 1 × User manual (English) 1 × Warranty card 1 × Certificate of quality 1 × Set of accessory tools (optional) CERTIFICATIONS CE certification RoHS compliant FCC compliant APPLICATIONS Automotive repair workshops Fuel injector rebuilding services Garage and service stations Vehicle maintenance centers DIY automotive enthusiasts Motorcycle repair shops

WASTE OIL EXTRACTOR / OIL DRAINER Product Type: Pneumatic Waste Oil Extractor / Oil Drain Collector PERFORMANCE PARAMETERS Vacuum Degree: 0 to -0.08 MPa Working Air Pressure: 8-10 kg/cm² Adjustable Height: 120-140 cm CAPACITY SPECIFICATIONS Tank Capacity: 80 Liters Measuring Cup Capacity: 10 Liters Oil Drain Pan Capacity: 10 Liters CONSTRUCTION Wall Thickness: 1.2 mm Material: Tank: Iron (steel) Measuring Cup: Engineering plastic WEIGHT Net Weight: 19 kg Gross Weight: 20 kg PACKAGE INFORMATION Packing Quantity: Oil drain tank: 1 piece per carton Measuring cup: 1 piece per carton Packaging Material: Tank body: 5-layer kraft paper Measuring cup: 7-layer kraft paper Package Dimensions: Tank body: 45 × 43 × 77 cm Measuring cup: 39 × 27 × 27 cm FEATURES Pneumatic operation (compressed air powered) Adjustable height for different vehicle types Large capacity 80L steel tank Transparent 10L measuring cup for easy volume reading Built-in oil drain pan Durable steel construction with 1.2mm wall thickness Suitable for collecting waste engine oil, transmission fluid Ideal for auto repair shops and garages Easy to move and operate APPLICATIONS Automotive repair workshops Garage and service stations Vehicle maintenance centers Oil change services Waste oil collection and recycling

16L Manual type Packing: 59*24*26/2pcs, 15/14kg

OIL SUCTION PUMP 500 CC

Rated load: 0.5T Pallet size: 240mm×240mm Cylinder diameter: 60mm Lifting height: 810mm Maximum height: 1930mm Minimum height: 1120mm G.W / N.W: 27kg/25kg Carton size: 108.5×30.5×16.3cm

The state-of-the-art aligner system is engineered for unparalleled precision. It offers 0.01 degrees of alignment accuracy with real-time measurements to enhance your workshop’s productivity. Features: Precision Wheel Alignment: Faster, Accurate, and Reliable! Intuitive real-time data Comparison with standards; Industrial-grade hd camera, total Vehicle & platform coverage; Precision wheelbase & track Detection; Rugged fiberglass targets, speed, Stable, strong; Engine frame adjustment at Your fingertips; In-house software with rich vehicle Data, and free upgrades; Power supply: 110-220V,50/60Hz Display Precision: Accuracy 1'/0.01°/0.1mm Total Toe: Measurement Range ±20°, Accuracy ±2', Max Measurement Range ±45° Individual Toe: Measurement Range ±10°, Accuracy ±1', Max Measurement Range ±45° Camber: Measurement Range ±15°, Accuracy ±1.5', Max Measurement Range ±45° Caster: Measurement Range ±20°, Accuracy ±6', Max Measurement Range ±45° King-Pin: Measurement Range ±20°, Accuracy ±6', Max Measurement Range ±45° Set Back: Measurement Range ±5°, Accuracy ±2', Max Measurement Range ±45° Thrust Angle: Measurement Range ±5°, Accuracy ±2', Max Measurement Range ±45° Track Width: Measurement Range <2400 mm, Accuracy ±2.5mm, Max Measurement Range 1400mm-2500mm Wheel Base: Measurement Range <3750 mm, Accuracy ±2.5mm, Max Measurement Range 1950mm-4000mm

Balancing Modes 6 Balancing speed 200 r.p.m Rim diameter 252-610 mm 10"-24" Rim width 40-510 mm 1.5"-20" Split and hidden weight solution √ Measuring time 8s Balancing accuracy ±1g(±0.04 oz) Max. wheel weight 65 kg (143 lbs) Power supply voltage options 220V 1Ph Option motor power 0.2kw/0.25kW Noise level < 70dB N/G weight 105/126kg Package dimension 960*760*1250mm

Lifting capacity: 4500kg Lifting height: 1700mm Min. height: 200mm Lifting time: ≤55s Lowering time: ≤35s Power supply: 380V 50Hz Motor power: 2.2kW Noise level: ≤70dB Platform length: 4650mm Machine length: 5670mm Machine width: 3340mm Applicable vehicle types: Truck, Bus, Pickup, SUV, Sedan Not applicable: Motorcycle With 2000kg rolling jack

Universal Design: Our universal belt tension gauge fits all vehicles, Asian vehicles and motorcycles equipped with secondary drive belts, and it comes with a 10-pound weight. Easy-to-Read Readout: The pressure gauge design delivers clear readings with distinct markings to avoid confusion during operation, bringing greater convenience to your work. L-Shaped Pad: This universal belt tension gauge is equipped with a versatile L-shaped pad, engineered to securely hold the belt in place while you adjust its tension. Fast & Accurate Measurement: The gauge enables quick, effortless and precise belt tension measurement. It helps you set the correct tension for your vehicle and prevents premature belt wear and shortened service life. Application Scenarios: This belt tension gauge is designed for use after motorcycle belt replacement, tension adjustment or wheel repair. Specifications Item Type: Belt Tension Gauge Material: Metal Alloy Features Compatible with most motorcycles fitted with secondary drive belts, with a 10-pound measuring weight. Clear, easy-to-read markings for precise measurement. Universal pad firmly holds the belt steady during tension adjustment. Ideal for use after belt replacement, tension adjustment or wheel repair. Packing List 1 x Belt Tension Gauge Instructions & Notes Align the small O-ring with the 10-pound marking. Place the U-shaped belt support at a 90° angle against the underside of the belt, position the large O-ring to the reference point, and record the initial reading. Push the rubber bumper upward until the small O-ring touches the base of the tool body. Realign the large O-ring to the reference point; the difference between the two readings equals the belt deflection value.

C0636B Bench Lathe Model C0636B Technical Specifications Max. swing over bed: 360mm Max. swing over cross slide: 212mm Max. swing over gap: 491mm Distance between centers: 1000mm Width of bed: 187mm Spindle bore and nose: A:38mm D1-4/B:51mm D1-5 Spindle taper: A:MT5/B:MT6 Speed step: 8 steps Cross slide travel: 170mm Compound rest travel: 90mm Spindle speed range: A:70-2000rpm / B:90-2000rpm Max. section of tool: 16×16mm Threads inch pitches: 4-56T.P.I. (34 kinds) Threads metric pitches: 0.4-7mm (26 kinds) Longitudinal feeds range: 0.052-1.392mm/rev (32 kinds) Cross feeds range: 0.009-0.253mm/rev(Metric lathe); 0.015-0.402mm/rev(Inch lathe) Tailstock quill taper and travel: MT4 / 100mm Tailstock quill diameter: 32mm Main motor power: 1.5kw Coolant pump power: 40w Packing size: 1935×750×1500mm Net Weight / Gross Weight: 600kg / 700kg Standard Accessories Machine stand Coolant system 3 jaw self centering chuck 160mm Foot brake 4 jaw independent chuck 200mm Dead center Face plate Chasing dial indicator Follow rest Splash guard Steady rest Tool box with tools Working light

Type XK7113A CNC Milling Machine Full English Technical Specifications Worktable Worktable size (L×W): 400×140mm T-slots size (Quantity×Width×Spacing): 3-12/40mm Travel X axis travel: 220mm Y axis travel: 120mm Z axis travel: 200mm Machining Range Max. drilling diameter: 13mm Max. milling diameter: 13mm Max. tapping diameter: N/A Spindle Distance from spindle center to column: 187.5mm Distance from spindle nose to worktable surface: 215mm Spindle speed: 3000rpm Spindle taper: ER20 Spindle power: 400w Main motor type: Brushless motor Feed System Feeding motor torque (X/Y/Z axis): 2.0/2.0/3.0 N.m Feeding motor type: Stepper motor, Z axis with brake CNC controller system: Mach 3 / Linux Machine Size & Weight Overall size (L×W×H): 673×775×7700mm Net Weight / Gross Weight: 125kg / 155kg

Type X6325; Model: X6325 3~380V/50Hz X-axis Automatic Feed Z-axis Electric Lifting 3-Axis SINO Digital Readout System 8" / 200mm Universal Dividing Head Table Size: 1270×254 MM Longitudinal Travel of Table: 800 MM Cross Travel of Table: 400 MM Vertical Travel of Table: 500 MM Spindle Speed Range: 80-5440 R.P.M (16 speeds) Spindle Travel: 127 MM Spindle Feed Rate: 0.04/0.08/0.15 Distance from Spindle Nose to Table: 500 MM Spindle Taper: R8 Spindle Motor Power: 2.2 KW Milling Head Left & Right Rotation: 90° Milling Head Forward & Backward Rotation: 45° Overall Machine Weight: 1650 KG Packing Dimension: 1516×1550×2080 MM Standard Packing List: Coolant Water Pump: 1 piece Power Feed Unit: 1 piece 8" / 200mm Universal Dividing Head: 1 piece 6 Inch Machine Vise: 1 piece 58 Pcs Clamping Kit: 1 set R8 Chuck Set: 1 set Draw Bar: 1 piece Working Lamp: 1 piece Tool Box: 1 piece Coolant Tray: 1 set Technical Documents: 1 copy Machine Operation Manual (Mechanical & Electrical): 1 copy Spare Parts Catalog for Maintenance: 1 copy Certificate of Conformity: 1 copy Packing List: 1 copy

ZAY7045V Mill / Drill Machine (Variable Speed) Technical Specifications Features Variable spindle speed Supports milling, drilling, tapping, boring and reaming Headstock swivels ±45° vertically Precision micro feed function Adjustable gibs for table clearance Strong rigidity, powerful cutting force and accurate positioning Technical Parameters Max. drilling capacity: 45mm Max. tapping capacity: 20mm Max. face mill capacity: 80mm Max. end mill capacity: 32mm Max. distance from spindle nose to table: 447mm Min. distance from spindle axis to column: 286mm Spindle travel: 130mm Spindle taper: MT4 Range of spindle speed (2 steps): 100–530rpm, 530–2800rpm Auto-feeding steps of spindle: 2 steps Auto-feeding value of spindle: N/A Swivel angle of headstock: ±45° Table size: 800×240mm Forward and backward travel of table: 210mm Left and right travel of table: 500mm DC Motor power: 1.5kw (2HP) Net Weight / Gross Weight: 375kg / 327kg Packing size (L×W×H): 770×880×1150mm Loading amount per 20" container: 36pcs complete with Optional Accessories: X-axis automatic power feed unit Coolant system Machine stand with oil tray Working lamp 3-axis digital readout (DRO) Spindle speed indicator

analog dial indicator with magnetic stand

plate datar padat yang digunakan untuk mengukur dengan sempurna seakurat mungkin Tata letak dan kerataan benda kerja serta Pengaturan dan penyetingan alat uji dan alat ukur presisi.

Max. Shearing Thickness: 3 mm Max. Shearing Width: 1300 mm Shearing Angle: 2°14′ (or typical range 1°30′ – 2°25′) Strokes per Minute: 20 – 56/min Back gauge Range: 350 mm Main Motor Power: 2.2 kW Input: 3~380V/50hz Machine Dimensions (L×W×H): 1900×1100×1200 mm Machine Weight: Approx. 1100 kg

Nominal Pressure: 800 kN Length of Working Table: 2500 mm Throat Depth: 320 mm Ram Stroke: 150 mm Number of Strokes: 8 strokes/min Main Motor Power: 7.5 kW Input Power Source: 3~380V/50Hz ESTUN E21 Controller with movavle support

Type MD618; Model: MD618 Input voltage: 3~380V/50Hz Max Size of Grinding Workpiece (L×W×H): 460×160×250 MM Max Longitudinal Travel of Worktable: 500 MM Max Cross Travel of Worktable: 160 MM Max Distance from Worktable Surface to Spindle Center: 400 MM Worktable Guideway: One V-way & One Flat-way Max Load Capacity of Worktable: 100 KG Worktable Size (L×W): 450×150 MM Worktable T-slot: 14×1 MM×N Worktable Speed: 3-20 M/MIN Front & Rear Handwheel Feed Rate: 0.02 MM per division, 2.5 MM per revolution Up & Down Handwheel Feed Rate: 0.01 MM per division, 1.5 MM per revolution Grinding Wheel Size (OD×Width×ID): 180×13×31.75 MM Spindle Speed: 2850 RPM Spindle Motor Power: 1.1 KW Hydraulic Motor Power: Not specified Working Pressure: Not specified Max Flow Rate: Not specified Oil Tank Capacity: Not specified Coolant Pump Power: 40 W Parallelism of Machined Surface Relative to Reference Surface: 0.005 MM over 300 MM Surface Roughness: Ra 0.32 UM Overall Machine Dimension (L×W×H): 1100×1100×1700 MM Gross / Net Weight: 0.8 T

UNIVERSAL TOOLS GRINDER Adopts precise dovetail guide rails, ensuring stable table movement and lightweight operation. The motor can rotate 360°, expanding machine functions and grinding range. Various grinding attachments can be installed to grind different types of cutting tools. Simple setup. Easy to operate. Accurate and efficient grinding performance. Model TG600 Left & Right Travel: 270mm Front & Rear Travel: 150mm Table Size: 130×520mm Grinding Wheel Vertical Stroke: 120mm Grinding Wheel Rotation Range: 360° Spindle Speed: 2800/3600rpm Motor Power: 3/4HP, 380V Net Weight / Gross Weight: 160/168kg Packing Dimension: 700×630×630mm

Model S122G Metal Cutting Band Saw Basic I Machine Type: Horizontal Mitre Metal Band Saw Cutting Capacity At 0° straight cut Round bar: Ø190 mm Rectangular stock: 300 × 190 mm At 45° mitre cut Round bar: Ø120 mm Rectangular stock: 140 × 85 mm Saw Band Parameters Saw band dimension: 1638 × 13 × 0.65 mm 3 Variable cutting speeds: 21 / 31 / 54 m/min Power Supply & Motor Motor power: 0.55 KW (550 W) Voltage options: 220V/1Phase/50Hz / 380V/3Phase/50Hz Clamping & Structure Quick-release manual vise for fast workpiece clamping Saw head can swivel from 0° to 45° for angle cutting Ball-bearing supported saw band guides for stable cutting Auto cut-off safety function after finishing cutting Saw blade guard with safety interlock switch Emergency stop button equipped Machine Dimensions & Weight Overall length: 950 mm Overall width: 620 mm (with material stop) / 550 mm (without stop) Height (saw arm low position): 1060 mm Height (saw arm high position): 1430 mm Net weight: 56 KG Gross weight (with stand): ~72 KG Standard Accessories Matching saw band Material length stop gauge Machine stand Coolant system set Operation & maintenance manual Assembly tool set Main Features Three-speed band speed selection for different metal materials Compact horizontal swing arm design, easy to operate and space-saving Quick vise clamping reduces workpiece loading time Auto power-off protection after cutting completes Stable cast iron saw frame reduces vibration for smooth cutting surface Portable bench-top design with optional supporting stand for workshop use